E-Game Punk

① Press and hold "quan" for 1.5 seconds to power on the device. The device will quickly perform two telescopic movements, the battery indicator will light up in purple, and then it will enter standby mode. Press and hold "quan" again for 1.5 seconds to power off. The battery indicator light will go out.

② In standby mode, click "quan" to enter pre-stretch mode. Click again to cycle through the four modes.

③ In any mode, double-click "quan" to pause the telescopic function. Click again to resume the previous mode. During the pause, using other function keys switches back to the corresponding mode.

① Self-heating mode: When the device is powered on, click "wenduji " to turn on the heating mode. The heating indicator light flashes and the inner tank will be heated for 10 minutes. Then, the heating indicator light will stay on, indicating it has entered a 20-minute heat preservation mode. Subsequently, the heating mode will be turned off, and the heating indicator light goes out.

② Plug-in heating mode: After plugging in the power, press and hold "wenduji " for 3 seconds to enter the heating mode. The heating indicator light flashes quickly, indicating a 10-minute heating cycle followed by a 20-minute heat preservation mode. During the plug-in heating mode, the masturbator cup will also charge. All buttons are disabled while heating. Press and hold "wenduji " again for 3 seconds to turn off the heating mode.

① Accelerator button: In standby mode or pre-stretch mode, click "yuan" to enter telescopic mode 1. Click again to speed up the telescopic speed. There are a total of 7 speed levels. Double-click "yuan" to enter telescopic mode 7, the highest speed..

② Deceleration button: In standby mode or pre-stretch mode, click "O" to enter telescopic mode 1. Click again to slow down the telescopic speed. There are a total of 7 speed levels. Double-click "O" to enter telescopic mode 1, the lowest speed.

① Charging instructions: Remove the Type-C charging cable from the package and insert it into the charging port;

② The power indicator light flashes slowly during charging. When the battery is fully charged, the power indicator light stays on in purple;

1. After removing the cup lid, pinch both sides of the soft rubber snap ring and rotate it counterclockwise to unlock the snap ring and the cup body.

2.After the snap ring and cup body are unlocked, pinch both sides of the snap ring and pull hard to remove the soft rubber liner.

1.Align the buckle on the snap ring with the snap position at the mouth of the cup, and then place the soft rubber liner vertically into the cup body.

2.When the bottom of the soft rubber liner is attracted by the magnet, pinch the snap ring and tighten it clockwise.

For optimal product longevity, it is essential to care for the device.

Please clean the device before and after each use. For routine maintenance, it is recommended to use personal hygiene wet wipes with antibacterial properties to thoroughly wipe the product. If rinsing with clean water is necessary, please avoid directing water flow directly onto the charging port. 

Use clean water and a mild, non-irritating water-soluble cleaning agent (such as body wash, soap, or personal care cleanser) to gently cleanse the device. Do not use cleaners containing alcohol, petroleum-based solvents, or acetone to clean the device. After cleaning, use a clean, soft cloth to dry any water spots.

This product should be stored in a cool, ventilated, dry place away from direct sunlight, and should not be mixed with toxic, harmful, odorous, volatile, or corrosive items, and avoid contamination and heavy pressure.

Do not attempt to disassemble the device or replace the built-in rechargeable battery yourself.

Avoid subjecting the battery to physical harm, such as impacts, excessive pressure, or exposure to fire.

Ensure the device is powered off before connecting it to a charger. Do not use the device while it is charging.

When plugging and unplugging the charging cable, ensure your hands are dry.

Store the charging cable safely to prevent damage.

*Before discarding the device, remove the battery. Ensure the device is powered off before removing the battery. Dispose of the batteries safely.